Search for:. Home » QA. You may also like. Cable, from the dish dvr. It to my tv it would send it to the pc dvr and it would send the signal to the tv then.
Current dish dvr receivers to the latest. How to watch movies and shows anytime, anywhere, on your cell phone. So far be unable to help me connect the dvr to be controlled via computer. The key to allowing regular usage of these hard drives is to disable Power-up in Standby. The tricky part is gaining access to issue commands on the drive. There are two ways to do this. One includes using the original DirecTV or Dish Network box to allow for the drive to power on and spin up.
The other method does not require the DVR box. To keep things as simple as possible, and to allow for others to make the same changes, our engineer developed a workaround method using open source software.
The steps below outline the process to disable the Power-up in Standby behavior of a hard drive, thereby enabling its use in a general purpose computer. Please note that, to complete this process, the hard drive needs to remain powered on at all times, as the actual device configuration change occurs in the last step in the sequence. I haven't bought a new hard drive in a long time that I needed to mess with. You've started yourself down a path where I think you should be able to figure it out, if not, you didn't want to be on that path anyway.
May 1, 3 0 NEPA. It is an. The software will "Unlock" the drive It removes the zero state it is set to and allows the BIOS to see it and it will spin up" Then follow directions from there.
All you really have to do from there is a soft reset reboot computer on and off without powering off You can then format the drive and install whatever OS you want.
Or use Linux to try and get your movies off in one piece. The site is not allowing me to upload the ISO's email me and i will send them to you: The Files are about 1. Jan 4, 32, 27, Fairfax, VA.
Will the drive still work in the receiver after this "unlock" procedure? Obviously I don't intend to format the drive. TheKrell TheKrell, You should be able to use the drive in the receiver after unlocking it.
I don't know what type of drive you have. Different manufactures Western Digital, Hitachi have different firmware and different security features. This is to keep the info on the drive secured i. The drive will operate in a PC and should work in the reciever.
I don't understand why you need to unlock the drive for use in the reciever though. You could always set the lock feature back to on "on" using the ISO software and use it that way again. It is my understanding that Western Digital Drives have well implemented security. Hope this helps. The only "security" I know about on the internal drives is the use of a proprietary file system which has already been reverse engineered. So what stopped me from copying my programs was the inability to get the drive to spin up.
Obviously I could be wrong about that! I was thinking your "unlock" programs might fix that problem, while allowing me to reinstall the drive in the receiver and continue normal operation. TheKrell said:. TG2 SatelliteGuys Pro.
0コメント